Re: Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed
Quote:
Originally Posted by Arne
You may want to look at the pressure info and specs again. The "typical" rack conversion that requires pressure reduction to ~800 psi is the old hot rodder favorite Pinto/Mustang II rack. The POL rack for our trucks is based on a mid-90's Dodge Dakota, and should be fine with the higher pressure. I emailed POL tech support and Erick confirmed that the higher pressure from the Saginaw-type pump was fine with their rack, no pressure reduction needed.
|
Oh damn, nice!! Then I can return the 135.00 valve to speedway!! lol
Again, thanks for the update. That helps too with routing!! You saved my butt Arne!!! thank you
Jeff
__________________
John 3:16 - Saved me... God Bless
|