Re: tire rack with barn doors
Here is the idea I am coming up with.. NO way around having to open the carrier to get to the passenger door,, The 37 is too much even when on the driver side.
I am getting the support for the spindle off the receeiver frame and the OEM from under the bumper. I am thinking 3/16 angle and welded to the lower portion of the spindle housing. This mock up is the only way to not have the latch interfere with the barn door unless i go full width and that is to much to walk around when open or trying to open it in a parking lot.
I thought i would share,
|