Re: 63 C10 w/ TH350 Shift Linkage
Trying to look online and all the setups I see seem to be newer and don't have a crossmember coming across below the front of the trans. This wont allow me to rotate the shift arm on the transmission so it has to start about the 10-11 o'clock position and can only travel to 6-7 which doesn't give me enough travel to let the linkage move freely and is in also causing it to be in a bind. I could always bend the linkage rod to free it up some but lack of travel seems to be my biggest problem.
__________________
1963 C10 2WD SB-Currently under restoration
|