The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**omodified** · 08-09-2023, 05:25 PM

In my last post, I mentioned finding some pinholes on the back side of the rockers. Yes Cornerstone, thank goodness for the rotisserie. The driver side was worked on today. Ground the primer down to see what is really there. It's not too bad I guess.

Used a carbide bit to open all of the holes until there was good metal. Then welded up the holes. Then grounded it all flush. On to the driver side tomorrow.

08-09-2023, 05:25 PM	#332
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,005	Re: "Midnight Rider" 1970 C10 SWB Fleetside In my last post, I mentioned finding some pinholes on the back side of the rockers. Yes Cornerstone, thank goodness for the rotisserie. The driver side was worked on today. Ground the primer down to see what is really there. It's not too bad I guess. Used a carbide bit to open all of the holes until there was good metal. Then welded up the holes. Then grounded it all flush. On to the driver side tomorrow. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848 Last edited by omodified; 05-04-2024 at 04:15 PM.