The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - AZ FS

**Riverstory** · 02-26-2021, 10:40 PM

I recently created the metal strip and cut the 1/8" EPDM rubber for my 66 panel restoration. I thought I'd offer this to our community and see if there are any of you wanting to save a number of hours chasing this down.

I first ordered white EPDM food grade rubber. Didn't work. Then ordered thinner EPDM RV rooftop rubber. Too thin. Lastly, this 1/8" black EPDM rubber is perfect.

I will send a cut piece of 1/8" EPDM rubber and a paper template so you can create your own metal strip.

$50 plus the ride via your choice of shipment.

BTW - The install came out awesome - couldn't be happier

02-26-2021, 10:40 PM	#1
Riverstory Registered User Join Date: Aug 2020 Location: Lake Havasu City AZ Posts: 142	FS - Suburban or Panel Rear Bumper Seal I recently created the metal strip and cut the 1/8" EPDM rubber for my 66 panel restoration. I thought I'd offer this to our community and see if there are any of you wanting to save a number of hours chasing this down. I first ordered white EPDM food grade rubber. Didn't work. Then ordered thinner EPDM RV rooftop rubber. Too thin. Lastly, this 1/8" black EPDM rubber is perfect. I will send a cut piece of 1/8" EPDM rubber and a paper template so you can create your own metal strip. $50 plus the ride via your choice of shipment. BTW - The install came out awesome - couldn't be happier Attached Images