Re: FOUND!!! Power steering O-ring to Flare ADAPTERS
The adapter(s) (only one of two shown) are from NAPA, made by Weatherhead (EATON). I chose to NOT use them and used the Lee Mfg. inserts instead. Either one will work, the inserts are cleaner and cheaper, $4 each and $6 shipping to Iowa. The adapters are $10 and $11 (diff. price for pressure/return.)
Sorry for the confusion.
The adapters will add some height to the lines, and could cause interferance with the hard line part, but don't know for sure.
Re-read your post, the top shows both one of the adapters, and then a cropped pic from the camaro thread of the Lee inserts that I used in the end.
__________________
I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes)
This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do.
RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!!
BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys
Last edited by 70C10Toejam; 06-01-2007 at 10:54 PM.
|