[tsetsaf]

Back over on page 2 of this thread "farmtruck" asked about dbw, cruise, and the ebrake. I believe I am running into this same issue. I have a 2005 DBW out of a Tahoe and have wired, checked, re-checked, and checked again all of the cruise, brake switch, and TCC switch connections... all are good but still no cruise.

How do I get the cruise to work? I have a total of three harness connections. 1. The main harness to the computer
2. Two harnesses on the TAC black box.

I have spent hours looking for possible solutions with no results. Any help is appreciated. Thanks.