Quote:
Originally Posted by 6DoF
in width or distance from the body mount?
if distance from the body mount, you can probably find that much just by loosening everything and biasing the cab to the chassis, the fenders to the core support, core to frame, etc.
if width, can you just add a plate to the core support?
|
The core support is behind the bracket holes. They line up perfect side to side but they are far enough back that the splash pan actually hits the bracket before fully in place. I thought about loosening the front but everything lines up so nice as it is. The core support holes are large and may allow me to tilt it but the splash pan is still a problem. Thinking to remove the brackets and lift the frame up and see where I’m at. May be able to relocate them or build my own.