View Single Post
Old 05-20-2022, 06:56 PM   #1
kev2809
low n' slo
 
kev2809's Avatar
 
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,133
Stock harness rewire questions

engine is 2002 DBW 5.3/4l60e

im in the process of depinning the wires and removing everything i dont need. im using brendans chart on lt1swap.com...and so far have removed every yellow wire. my question is, what happens with the "tan" blocks on the chart? if if im using the 4l60e do i leave all the "red" blocks? and this might sound stupid, but the "blue" blocks stay in the pcm..but will eventually be wired to the stand alone fuseblock?

also, if i am not running electric fans, should i pull those pins too, or just wire them like i will use them just in case for future references?

and after snipping all the pink wires and orange wires in connector C2....i have a pink B9 wire that doesnt show in the diagram. does that get snipped too?

sorry to sound like an idiot, but i dont like wiring lol. i figured i would give this a shot to try it myself
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread

-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
kev2809 is offline   Reply With Quote