|
Re: Stock harness rewire questions
Quote:
Originally Posted by ls1nova71
The purple starter wire isn't terminated anywhere in the harness, it's just routed down to the starter with some other wires. If you look near where the original fuse box plugged into the harness you'll find the other end of it. You can either use it or delete it if you are using your original wiring. I like to use it because it's already there and it makes things cleaner, you just have to hook the other end to the original purple wire in the truck.
|
right. it was snipped at the C2 connector I think. I wasn't sure if was controlled through the pcm or wiring to the truck harness starter wire. I'm using a universal 17 circuit harness for the truck which hasn't been installed yet.
I start fusing some of the pinks together following this diagram. but I'm changing it a little because I want them separated a bit more and not have too many linked to 1 fuse. so I bought a second fuse block
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread 
-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
|