The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 71lsx-LWB**Build Thread**

Benlugchev · 04-03-2013, 09:55 PM

UPDATE: Fuel rail brackets completed

Custom Engine Mounts fabricated and engine set in truck at a -2 degres angle with a very low CG.

Started mockups for the turbo location and piping. This is about where the turbo will sit. 5" downpipe will run straight back duck under the cab and exit before passenger side rear tire. Air filter will stick through the radiator support up to the grill, for some fresh breathing air.

04-03-2013, 09:55 PM	#27
Benlugchev Registered User Join Date: Nov 2012 Location: Connecticut Posts: 99	Re: 71lsx-LWBBuild Thread UPDATE: Fuel rail brackets completed Custom Engine Mounts fabricated and engine set in truck at a -2 degres angle with a very low CG. Started mockups for the turbo location and piping. This is about where the turbo will sit. 5" downpipe will run straight back duck under the cab and exit before passenger side rear tire. Air filter will stick through the radiator support up to the grill, for some fresh breathing air. __________________ 71' Chevy C10-Turbo 6.0L-80e-JFR218-738hp/700tq-10.1@133mph... 1.54 60' (3737lbs) 00' GMC-c2500-Turbo 6.0L-80e-JFR212-500hp/560tq -11.67@116mph (5182lbs)