The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 700r4 only shifts P, R, N, and 1st. Will stuck TV valve do this?

**AussieinNC** · 08-23-2021, 06:32 PM

The attached image shows the clutch application chart for the 4 speed trans....

The image makes reference to solenoids A & B ...ignore those references...

The common point for 1-2 and 3-4 shifts is the second band apply system...pull the servo and make sure the end of the band has not snapped off...also look for broken springs and pin on the servo...

You will need a pressure gauge to set the tv pressures correctly...

Hope the chart helps...

08-23-2021, 06:32 PM	#2
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,158	Re: 700r4 only shifts P, R, N, and 1st. Will stuck TV valve do this? The attached image shows the clutch application chart for the 4 speed trans.... The image makes reference to solenoids A & B ...ignore those references... The common point for 1-2 and 3-4 shifts is the second band apply system...pull the servo and make sure the end of the band has not snapped off...also look for broken springs and pin on the servo... You will need a pressure gauge to set the tv pressures correctly... Hope the chart helps... Attached Images __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox