The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Boo

**Rich72C10** · 05-08-2021, 05:22 PM

So I have been putting in new door seals, which really hasn't been going well for me. I more or less gave up on the passenger Anti-Rattle bits until I get new ones.

Sooo, I moved to the driver's door to just put in the main seal around the inner grove for the window. This actually was my main goal, as both sides moved away about 2~3 inches from the triangle window.

Anyways, as I was running the window up/down to insure my new seal was seated okay, this metal bit fell into the bottom of the door. I assume it is part of the regulator, which would be why my window is all whacky.

I am pretty sure I need a new regulator?

05-08-2021, 05:22 PM	#1
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Boo - Random Door Bit Fell Out (Regulator?) So I have been putting in new door seals, which really hasn't been going well for me. I more or less gave up on the passenger Anti-Rattle bits until I get new ones. Sooo, I moved to the driver's door to just put in the main seal around the inner grove for the window. This actually was my main goal, as both sides moved away about 2~3 inches from the triangle window. Anyways, as I was running the window up/down to insure my new seal was seated okay, this metal bit fell into the bottom of the door. I assume it is part of the regulator, which would be why my window is all whacky. I am pretty sure I need a new regulator? Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim