The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ‘74 C-30 Dually Front Suspension Questions

bigtexasrob · 11-21-2018, 10:56 PM

Re: Pancaked x-member
This is the process of cutting and raising the bottom of the stock front member, correct?

Re: Modified a-arms and springs/spindles
I’m looking for a 3” wider/3” lower arm with a bag bracket, and will then install a 3” drop spindle. By my college drop-out math, it should ride comfortably at the correct height, maintain usable wheel angle (fenders will be modified as well) and lay on the ground or very close to it.

11-21-2018, 10:56 PM	#3
bigtexasrob Registered User Join Date: Nov 2018 Location: Albuquerque, NM Posts: 17	Re: ‘74 C-30 Dually Front Suspension Questions Re: Pancaked x-member This is the process of cutting and raising the bottom of the stock front member, correct? Re: Modified a-arms and springs/spindles I’m looking for a 3” wider/3” lower arm with a bag bracket, and will then install a 3” drop spindle. By my college drop-out math, it should ride comfortably at the correct height, maintain usable wheel angle (fenders will be modified as well) and lay on the ground or very close to it.