Re: Rear drums removal on a 67 C50
Yes you will have to pull the axles all the way out. Remove the bearing retaining nuts, the outer bearing will come out. Then you can remove the drum, the inner bearing will be held in by the grease seal. RH5's are the old widow-maker type that split down the center of the wheel and are held together with clips. Most people scrap them and replace with tubeless or two or three piece lock ring type wheels.
split, parts should be available through any good parts house (Napa, Carquest, any old mom and pop type store if you're lucky to have one, or Rockauto.com). Raybestos and Dorman usually have good medium duty brake catalogs online.
__________________
RJD
1984 Chevrolet C30 welding truck 454/SM465
1977 GMC C15 pickup 350/TH350
1970 Chevrolet C20 pickup 350/TH400
1970 Chevrolet K20 Suburban 454/TH350
1969 GMC 8500 478M V6/5 spd winch truck
|