Quote:
Originally Posted by cwcarpenter98
Well, well, well, look who decided to work on his truck this evening...
Yup, you read that right. I'm back to working on my trucks again.
This evening's activities consisted of yanking the carb off again and then completely disassembling it for cleaning and new gaskets and such. I did make one mistake though. I twisted the head off one of the throttle blade screws, so now I get to figure out how to fix that problem. I'm wondering if it'll be easier to just acquire another throttle shaft if I can't get the remnants of that screw out
|
I would try small center punch if possible.
Then a left-hand drill that Size.
This will reverse the screw out.
A magnified glass will help.
You need to be on center For Sure.