[omodified]

I decided to skip working on the truck yesterday. I'm not superstitious, but I just decided to find something else to do on Friday the 13th. So I tried to get some things done this morning, before lunch.

Evacuated the brake system. I used a turkey baster again, to grab most of the fluid in the master cylinder. Then I used a syringe to get as much fluid out of the lines from each wheel cylinder bleeder.




Once I couldn't get anymore fluid from anywhere, I disconnected the lines from the bottom of the brake distribution block.




Removed brake rod from brake pedal and booster






Removed four nuts holding the booster to firewall and removed booster.








Removed ragjoint, and firewall to steering column mount.




Disconnected wiring harness on steering column and disconnect optic cable to instrument cluster. Removed two under column brackets and column strap. Removed steering wheel, then steering column.