View Single Post
Old 04-12-2021, 07:29 PM   #37
mr.mud1
Registered User
 
mr.mud1's Avatar
 
Join Date: Dec 2020
Location: Joggins Nova Scotia
Posts: 1,599
Re: Going back to factory intake and carb

Quote:
Originally Posted by Bbarbeau View Post
Thanks - this is for a 72, sorry.

I found another intake that’s in a 69 GM. It’s got an EGR valve, no carb but I think the air cleaner may be available. The whole engine for $150 or parts off it. I’d want the valve covers too.

Number on the intake is: 3997771 which seems to be a 1973 intake. It has a pad on the passenger side which I assume is for the divorced choke? So I’d need to find a carb then and the associated mechanism?
Posted via Mobile Device
you can block off the hole in the manifold where the EGR valve bolts on,not the best looking setup but it will work,here again if all you're getting is valve covers and an intake manifold,it's really not a bargain at $150.00 if you still have to hunt a carb but maybe there's enough parts there to make it worth your while?
mr.mud1 is offline   Reply With Quote