The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

loosenutz · 09-14-2019, 08:18 PM

Got quite a bit done today. Machined the LCA shafts to move them forward. Removed the saddles that hold the LCA shaft. Sandblasted and painted them. Then reinstalled them using socket head bolts to get a better engagement into the shaft. Cut a coil off of the front springs, sandblasted, and painted them. Then I clearanced the rear of the cross-member to allow the LCA to move forward without interfering.

09-14-2019, 08:18 PM	#18
loosenutz Registered User Join Date: Jul 2019 Location: San Diego Posts: 73	Re: Loosenutz's 66 SWB BBW LM4 Build Got quite a bit done today. Machined the LCA shafts to move them forward. Removed the saddles that hold the LCA shaft. Sandblasted and painted them. Then reinstalled them using socket head bolts to get a better engagement into the shaft. Cut a coil off of the front springs, sandblasted, and painted them. Then I clearanced the rear of the cross-member to allow the LCA to move forward without interfering. Attached Images __________________ 1966 C10 SWB BBW LM4 4L60E Build 1966 Pro Touring Chevy II Build Last edited by loosenutz; 09-15-2019 at 11:36 AM.