The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-20-2020, 12:43 AM

Here is the bracket I used. I will say I had to cut the tab's off and re drill the front and back side to mount the pump closer to the mounting bolts so I would clear the frame. I also cut the long bar they send and drilled a new hole to mount it to the back.

01-20-2020, 12:43 AM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Power steering pump choices Here is the bracket I used. I will say I had to cut the tab's off and re drill the front and back side to mount the pump closer to the mounting bolts so I would clear the frame. I also cut the long bar they send and drilled a new hole to mount it to the back. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.