Re: 51 Chev on a S10 frame, named Dale
The rims I am using are just 15 x 7 inch GM wheels that were on my Tempest with Dog Dish hub caps. I think the factory wheels have a 4.5 inch back space.
I am also using 2 inch drop spindles with 2 inch spacers on the front, and 1.25 inch spacers on the rear, with a Blazer 4x4 diff. I thought the Blazer rear would have allowed me not to use rear spacers, but I do not want wheel wells in the bed, so I extended them another 1.25.
Here is a recent pic, with the cab off for the last time (I hope) and you can see the clearance between the front tire and the tie rod end....with the 2 inch spacer.
What is the Back Spacing on your 16 inch rims? if it is greater than 5 inches, I would think you will need other rims, or spacers, cause if you need to remove wheel weights to gain clearance, you are too close.
|