Quote:
Originally Posted by mr48chev
It's a lot simpler if you bolt the pan to the radiator support before you put the inner fenders on as the photo that Leegreen posted shows. When fenders and all are in place then you put the grill on.
You have to reach in and around behind the grill to put the two top screws though the holes in the fender to the top bar of the grill on each side. Make sure that before you put the grill on you have the correct screws sorted out to go in those spots and the nut plates if needed in place.
I'm thinking that they usually have a 7/16 head on them. Reaching those spots is and exercise in dexterity.
|
Thanks. I'm going to have a few more questions on front end assembly given that it was already disassembled when I acquired it.
I currently have the inner fenders mounted, the radiator support (and radiator in place), and just mounted the part that I inquired about at the top of this thread.
I need to install the fender support brackets that appear to be mounted on the sides of the radiator support/inner fenders.