Re: Drop spindle Question
Quote:
Originally Posted by weq92f
I recently went through something similar... PO installed 71-72 components onto my 67 with drop spindles to match those 71-72 ball joints and tie rod ends. After ordering and installing the WRONG upper/lower ball joints for a 67, I discovered they will not work with the spindle which was requiring 71-72 parts.
MOOG parts for the two different model ranges.
.........upper lower outer inner upper shaft kit lower shaft kit
67-70 K6024 K6023 .ES350L ES370R K6098 K6147
71-72 K6124 K6117T ES415RL ES403L K6098 K6147
The table above lists out the ball joint, tie rod and a-arm shaft MOOG part numbers for 67-70 and 71-72. Note that the shaft kits are identical.
Hth,
-klb
|
I should know better than buy something someone else built. I have been bitten by this before. I have some investigating to do to figure out exactly what I have. The joys of hotrodding! Thanks for the numbers.
__________________
1967 C10 Step side
1970 AMX 390
1977 Datsun 280Z highly modified with '95 LT1 power
Last edited by ga-stepside; 05-25-2017 at 10:26 AM.
|