Here we are 2 years blown by. I have started back on my 54. I was at a standstill, afraid to tackle the firewall, floors etc. but recently decided its time to dive in. So here is where we left off.
http://67-72chevytrucks.com/vboard/a...1&d=1548551863
http://67-72chevytrucks.com/vboard/a...1&d=1548551863
I welded a couple of braces in the door openings to keep the front of the cab from shifting upon firewall and floor removal.
http://67-72chevytrucks.com/vboard/a...1&d=1548552071
I then cut out the stock firewall. A jigsaw/ cut off wheel combo worked well.
http://67-72chevytrucks.com/vboard/a...1&d=1548552071
Next i used a flange/punch tool to punch holes around the perimeter of the new firewall for plug welds. I temporarily mounted it with a couple of self tapping screws and marked a line on the old firewall so I can trim it up. Also marked the hood hinge bolts for drilling the new holes
http://67-72chevytrucks.com/vboard/a...1&d=1548552071
The flooring is just laid in place. Sorry the pics are out of order. Its been awhile. I hope everyone is doing well and I look forward to whats to come.
Rick