View Single Post
Old 08-03-2015, 03:11 PM   #3
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: DBW Cruise Issue

Have you verified that you are getting a constant 12v at the 'on/' wire pin 14 on the TAC? Orher than that, make sure you have the brake switch adjusted properly.Also, make sure pin 6 is hooked to the brake light switch that is hot when the brakes are applied. You dont have LED tail lights do you?
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote