Re: No Limit Trailing Arm Rear Suspension
OK OK. Here are some picts. The truck sits good now with the bed on, but no floor in it yet. The truck has appx 1" rake. One of the things that slowed picts down is that the truck was apart again for a cam swap and a tune. The owner reports that the torque and throttle response is WAY better, and even with the increased power, the truck hooks and leaves with a lot less wheel spin. He also reports that mid corner grip and corner exit grip/acceleration inspires a LOT of confidence. (maybe too much) - But that it really stays connected to the road. The current spring is a 14" 225 lb. We are going to try a 12" 250lb spring to get a little bit more drop, more adjustment on the spring collar, and a bit firmer - about 10% is all. One pict shows the clearance in the notch at Ride Height.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
|