|
Re: My 67 LS swap on a budget
So, I hated the stock engine mount and how cumbersome it is to install. I ordered a set from POL but then I got a notification they are on back order. So, I made my own. I cut a section of DOM tubing with 3/16 wall thickness, grind down the center of the engine mount bracket to get stronger weld and I have later model engine mount:
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
|