The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Rich72C10** · 10-20-2020, 07:26 AM

For the record, I do not have that “hot slot” aka smiley face intake. I have the one exactly for my 72 SBC - got a NOS from North West (350ci V8 Intake Manifold 6268751). My Carb is matching for 72 SBC C10 Truck, exactly (7042208 1972 CHEVY GMC TRUCK).

Edit: While the sticker on the intake is not 7042208, it's a crossable number back to mine (this intake part number is for a Chevy/GMC boat that was made past '72). I had to get a new one because my stock one had a crack in it

10-20-2020, 07:26 AM	#10
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: Hard Starting Hot For the record, I do not have that “hot slot” aka smiley face intake. I have the one exactly for my 72 SBC - got a NOS from North West (350ci V8 Intake Manifold 6268751). My Carb is matching for 72 SBC C10 Truck, exactly (7042208 1972 CHEVY GMC TRUCK). Edit: While the sticker on the intake is not 7042208, it's a crossable number back to mine (this intake part number is for a Chevy/GMC boat that was made past '72). I had to get a new one because my stock one had a crack in it Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| Upgraded Fully Super Trim Last edited by Rich72C10; 10-20-2020 at 08:07 AM.*