So Following on from how I had seen others set the lower bag cup into the LCA I thought I would do the same.
I think the photos give a pretty good explanation as to what I did.
LCA re installed with the bag bolted in
Because the factory spring mounts are set backwards from the center of the LCA and I was now mounting the air bag in the center of the LCA, it meant that the upper bag mounting holes no longer lined up.
So i cut out a section of the upper bag plate with the holes in it. but off center by 20mm. so that when I flipped the piece it would move the holes over by 40mm
Seemed I had achieved my goal of lowering the car, however the wheel/tyres where now interfering with the cab
