Yes you could stitch weld the plate to the frame, and not use the tubes. However, you will still need to cut holes in the inner flame web to unstall the bolts into the steering box.
The installation instructions do show you how to re-use the original flange from the end of the steering column shaft. However that does require the use of a drill press and a welder. If those are not available, the tube and flange that I sell is a simple solution.
Quote:
Originally Posted by gbrown
Could I forgo the pieces of tube and longer bolts if I were able to just weld your bracket to my frame rail like you suggest doing in the 1st post? Also, does your bracket include directions regarding re-installing the steering shaft, etc? Thanks.
|