The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Controlling fan with Terminator x Fan Control circuit

LS short box · 04-27-2024, 04:43 PM

On my LS swaps I've done it both ways. ECM and sensor in the radiator. The ECM is nice because you can adjust the on/off temp setting to your liking thru the ECM
Having said that my 98 Wrangler with a LS6/4L60E combo that I built 15 plus years ago I used a Painless fan control kit. Welded a bung into the radiator for the sensor. Has worked well.

04-27-2024, 04:43 PM	#5
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,943	Re: Controlling fan with Terminator x Fan Control circuit On my LS swaps I've done it both ways. ECM and sensor in the radiator. The ECM is nice because you can adjust the on/off temp setting to your liking thru the ECM Having said that my 98 Wrangler with a LS6/4L60E combo that I built 15 plus years ago I used a Painless fan control kit. Welded a bung into the radiator for the sensor. Has worked well.