Quote:
Originally Posted by jojomiamia
Hi folk, no rubbing or issue with this setup (« Not sure if the tire size question above is for me or someone else..... Wheels are 18"x9" and tires are P265/65R18 ») ?
Original springs and leaf ?
No spacer needed ?
Thanks
|
My 68 C20 is coils not leaf’s. Lowered coils front and rear. Used 1/2 ton coils. 2” lower front and 4” rears.
It turns lock to lock with no rubbing. I have also haul a cubic yard of compost home and no rubbing in the back with a good load. But they really fill up the wheel wells.
No spacers.
Before I ordered the wheels I had found another person on here who was running 18x9. He had a different offset and had to run a small spacer for offset.
My wheels. ION 171-8981MB - Style 171 Series Wheels
Specs:
Style No: 171
Size: 18x9
PCD1: 8 x 165.1
Offset: 0
Backspace: 5
Hub: 130.8
Load rate: 3300
https://www.tdotperformance.ca/ion-1...tte-black.html
The rear caps on the wheels were to shallow to fit over the axle hubs that stuck out so I had to build a spacer that went between the wheel and the extra cap to push the centre cap out 3/4”.