|
Re: Control Arm Rubbing tire - solution 101 - found
Quote:
Originally Posted by 70cst
Ok ... so if I understand it correctly:
I have a 4" BS and if I go with a 3" BS it will pull the tire another inch outwards? Thanks
|
Yes. It will move the barrel of the wheel out vs the hub centerline. Doing so widens the track width if not going to a narrower wheel.
The more aggressive you get, the harder it is on wheel bearings as a result from the additional weighted leverage of a steel wheel. Just a maint related item to keep in mind.
Again..... Trimming the rain gutter is very common for the minimal clearance needed. It just needs to be done w/care in mind.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|