The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 11-21-2021, 11:12 AM

Thanks Jim!!

Wagon progress! So Jared has been tackling the fun task of prepping interior trim pieces, getting them ready for another round of epoxy..

Another modification we're undertaking, the air cleaner, when mocked up on the engine, showed a tight proximity to the back of the AC compressor. Looking at the clearance we had to the firewall, moving backward 1" will give us much needed breathing room for the AC lines. So out with the old ....

And to move rearward, the mounting hole is moved forward one inch..

Next in store is a new bottom for the air cleaner..

A hammerform is used to give us a folded lip out the bottom

https://youtu.be/QPLDGIxJAYk

https://youtu.be/Zm6TIkxDDUA

11-21-2021, 11:12 AM	#1249
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,633	Re: 55 Wagon Progress Thanks Jim!! Wagon progress! So Jared has been tackling the fun task of prepping interior trim pieces, getting them ready for another round of epoxy.. Another modification we're undertaking, the air cleaner, when mocked up on the engine, showed a tight proximity to the back of the AC compressor. Looking at the clearance we had to the firewall, moving backward 1" will give us much needed breathing room for the AC lines. So out with the old .... And to move rearward, the mounting hole is moved forward one inch.. Next in store is a new bottom for the air cleaner.. A hammerform is used to give us a folded lip out the bottom https://youtu.be/QPLDGIxJAYk https://youtu.be/Zm6TIkxDDUA __________________ Robert