Re: norms 55 chevy pu build
Now the engine is further back, I can lower it down, I was even able to put a motor mount bolt in the driver side. I could not get the bolt in the pass. side as the oil pan is hitting the 80 firebird crossmember a little bit. The green tape shows where the pan is touching the crossmember so I will be researching pans next. You can see in the pic the engine only has to come down about 1/2 inch to get the bolt through the black mount and through the gold mount too. Question, do I need 2 special bolts here or can I use a regular bolts?
|