The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 '54 One Piece Windshield Install

JoeDude · 08-23-2023, 08:23 AM

Hey thanks for the info. I just wish the video was for the '54 Chevy. My glass is brand new from AMD. I firmly believe their vertical dimension is off. I'm convinced that if the top of the glass edge is above the pinch weld, it's impossible to get the rubber weatherstripping groove into the pinch weld. The bottom of glass and weatherstripping were firmly set into the pinch weld. Pinch weld to pinch weld measured vertically is about 1/8" less than the height of the glass they sent me. Aside from the weatherstrip side and top flaps that go on the interior side, did the window set in nice and snug and no binding?

08-23-2023, 08:23 AM	#3
JoeDude Registered User Join Date: Feb 2019 Location: Carpentersville, Il Posts: 41	Re: '54 One Piece Windshield Install Hey thanks for the info. I just wish the video was for the '54 Chevy. My glass is brand new from AMD. I firmly believe their vertical dimension is off. I'm convinced that if the top of the glass edge is above the pinch weld, it's impossible to get the rubber weatherstripping groove into the pinch weld. The bottom of glass and weatherstripping were firmly set into the pinch weld. Pinch weld to pinch weld measured vertically is about 1/8" less than the height of the glass they sent me. Aside from the weatherstrip side and top flaps that go on the interior side, did the window set in nice and snug and no binding? __________________ 54 Chevy 3100 Deluxe, IL6 235 12V conversion. Original as possible.