[Duncan K]

One of the holes in the floor pan for the cab mounts was way off. I had to put the cab on the frame and put the bolts and bushings in for the other three to line things up. Then I drilled up through the bushing from underneath to locate the fourth one. Couldn't resist throwing a fender on while the cab was on the frame.



Cut out and relocated the hole in the floor pan.



Cut out a bunch of plugs and filled all the unnecessary hole is the fire wall.



Got the cab flipped on its back and finished up some welding underneath. Ready to start working on the top of the windshield area and take the roof off.