Quote:
Originally Posted by pjmoreland
The original lines from the master cylinder on my 68 C10 were routed to the inside of the frame rail, as shown in the photo. They were anchored to the top of the frame rail with an "m" shaped clamp. I have since rerouted my front brake lines to the front of the crossmember after converting to disc brakes.
|
So right now the previous owner has them on the outside of the frame , coming off the prop valve , and it doesn't look correct. when I say it doesn't look correct I think its because the way the lines were bent around the frame. My '70 had them on the inside of the frame. I agree wih what was stated about being close to the exhaust. So I ordered a line kit from CPP. I have front disc but manual master. I am adding new master and booster. Hopefully next week I will tackle this job.