The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 DRGNWGN

**kev2809** · 06-04-2012, 03:14 PM

not a whole lot of anything goin on..

i did pull out all of the airbag wiring, the gauges, gauge airline. i re-routed the gauge line, put new wiring (trailer wiring), made some nifty weatherpack connectors for the valves, pulled all of the metal clamps that touched any airline and put rubber insulated clamps, then ran the wiring and gauge airline through the rear floor. also re-grounded all of the valves to a ground strip, cleaned up all the connectors and put some dielectric grease. also changed out the pressure switch wire with some that is designed to be in weather (other wire i had was crap). then wire loomed almost all of it...

06-04-2012, 03:14 PM	#630
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! not a whole lot of anything goin on.. i did pull out all of the airbag wiring, the gauges, gauge airline. i re-routed the gauge line, put new wiring (trailer wiring), made some nifty weatherpack connectors for the valves, pulled all of the metal clamps that touched any airline and put rubber insulated clamps, then ran the wiring and gauge airline through the rear floor. also re-grounded all of the valves to a ground strip, cleaned up all the connectors and put some dielectric grease. also changed out the pressure switch wire with some that is designed to be in weather (other wire i had was crap). then wire loomed almost all of it... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 06-04-2012 at 03:21 PM.