The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

memo43 · 03-04-2021, 12:09 PM

Truckster
Thanks for the tip, its verified no cam lobe for the fuel pump. So I will be looking up electric fuel pumps as well as wiring for them. I want to incorporate a cut off switch like the oil pressure switch.
Big Dave my set up currently has the ac delete on the diver side, and what looks like a Delphi 140 amp alternator. I'll have to get it tested an figure out the plug to be able to use with my sons stock harness.
Truckster, Bigdav160 thanks for the pics.

"almost last questions" how did you wire the alternator
did you use some special harness or just splice the connector into the stock alternator harness

Memo

03-04-2021, 12:09 PM	#19
memo43 Registered User Join Date: Nov 2007 Location: Gardnerville NV Posts: 220	Re: L31 engine swap questions Truckster Thanks for the tip, its verified no cam lobe for the fuel pump. So I will be looking up electric fuel pumps as well as wiring for them. I want to incorporate a cut off switch like the oil pressure switch. Big Dave my set up currently has the ac delete on the diver side, and what looks like a Delphi 140 amp alternator. I'll have to get it tested an figure out the plug to be able to use with my sons stock harness. Truckster, Bigdav160 thanks for the pics. "almost last questions" how did you wire the alternator did you use some special harness or just splice the connector into the stock alternator harness Memo __________________ Memo S. Retired US Marine Family Man Last edited by memo43; 03-08-2021 at 02:45 PM.