Re: How To~ Forward Tilt Your Hood.
Quote:
Originally Posted by dan468
"First thing you will need to do is trim off the extra metal. Trim off the light guage metal that was part of the hood tight to the heavier plate that is the slider/catch"
I have a hard time figuring out what was trimmed. Can you elaborate?
Thanks!
|
When I got these from the pick N pull I had to use a hammer and chisel (sp?) to get them off the hood since they are welded in place. So you will have hood metal welded to the slide plate that you will need to trim off before installing them on the hood. If you go to the wrecking yard you will see what I mean.
Kevin
LFD Inc.
Last edited by Rokcrln; 12-17-2006 at 02:17 AM.
|