[url=https://flic.kr/p/2hKo2sg]Screenshot_2019-11-13-15-45-22.jpg
paint later, drive shaft installed, what a PITA the 4 bolts to the CV joint, upside down and backwards. had to drop exhaust pipe for clearance to work
[url=https://flic.kr/p/2hKo2sG]20191113_133528
seems the forward location was best for the trans. temp. sender, maybe use the bungs for cooling lines later, at least I have a drain plug or two
[url=https://flic.kr/p/2hKo2EA]20191113_133617
trans. cooling lines done, fill her up with fluid. picked a rather difficult spot to make splices, right above crossmember
Now, to work on brake lines