[mrolds88]

Everything you have listed can be a DIY project. You may want to get a manual. Either a factory one or a Chiltons. Obviously the factory manual is the most precise. One thing I may suggest for you too, is to take pics, lots if need be as you are disassembling anything. Several notes that I can think of. Temp sender may be bad. They are usually Driver side between front 2 plugs. Pull the green wire and ground it. If needle moves sender is bad. Oil leak. Are you sure it is the pan gasket? When it is sitting, where does the oil drip from? Does it drip while running and not when it is off? Brakes, Replace everything that looks suspect. At minimum on the front, put pads and calipers on. Don't forget the little copper washers that should be in with the calipers. Bleed calipers one at a time. will take 2 people. Pretty good video here. https://www.youtube.com/watch?v=GAE6i1Sd2S0