The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**j_cst_10** · 04-09-2021, 10:21 AM

So this is odd timing but I just had this issue on my monte carlo ss a couple days ago.

I was able to crack the rear bleeders and violently slam on the brake pedal, and had a friend close the bleeders after. Did that a few times and my front brakes came back.

I guess you have the potential of moving the valve and blocking off the rears but this didn't happen.

I have a custom brake set up on this car so I will be removing this combo valve and going another route at a later date but it stops again so that's always a plus.

04-09-2021, 10:21 AM	#20
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 575	Re: Part No for Brake Combination Valve So this is odd timing but I just had this issue on my monte carlo ss a couple days ago. I was able to crack the rear bleeders and violently slam on the brake pedal, and had a friend close the bleeders after. Did that a few times and my front brakes came back. I guess you have the potential of moving the valve and blocking off the rears but this didn't happen. I have a custom brake set up on this car so I will be removing this combo valve and going another route at a later date but it stops again so that's always a plus. __________________ 1972 Cheyenne Super 20 Custom Camper 12 Valve Cummins/5spd manual 1972 Cheyenne Super Short Bed 557 Med Olive DK olive 1970 K5 Blazer Dark Gold 1966 Coronet 440 35k mile survivor 1991 Suburban 2500 454/4L80E 2wd 1985 Monte Carlo SS 383 Sbc, t-56 magnum 6spd and Ford 9"