The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

19723DR · 07-04-2009, 12:19 AM

Well I finally found some time to fix the air brackets. The old bracket that the original kit came with is for any coil spring application and not specifically designed for our type of trucks. Not to badmouth AIM industries, I started with the rear, cutting the bottom plate and then welding a four inch pipe to make the new one. I only gained a half inch so the next step will be to make some blocks.

07-04-2009, 12:19 AM	#208
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: 1972 3dr Suburban Build Thread Well I finally found some time to fix the air brackets. The old bracket that the original kit came with is for any coil spring application and not specifically designed for our type of trucks. Not to badmouth AIM industries, I started with the rear, cutting the bottom plate and then welding a four inch pipe to make the new one. I only gained a half inch so the next step will be to make some blocks. __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in"