The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - AC/Heater User Fan Control

**Rich72C10** · 06-14-2021, 12:39 PM

Okay, I like the way you worded that about the switch / eroded due to arcing / resistance build up over time, until the switch / connector more or less reaches critical mass until it melts down.

I bought the A/C Switch Plug from Manes Truck Parts, though the photo didn't show any terminals. But along with that, I did get the Blower Motor Relay, Compressor Switch and A/C Heater Blower Speed Resistor - just to have on hand.

06-14-2021, 12:39 PM	#4
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: AC/Heater User Fan Control - Melted Connector & Frozen Switch Okay, I like the way you worded that about the switch / eroded due to arcing / resistance build up over time, until the switch / connector more or less reaches critical mass until it melts down. I bought the A/C Switch Plug from Manes Truck Parts, though the photo didn't show any terminals. But along with that, I did get the Blower Motor Relay, Compressor Switch and A/C Heater Blower Speed Resistor - just to have on hand. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim