The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed

88Stanger · 04-10-2020, 12:42 PM

Ok all, I am stuck and frustrated.

Here is my issue. I have CPP 2.5 drop spindles, CaptainFab's power steering conversion with new power steering box installed, new pitman arm installed and a 1966 C10 non power steering center link.
I have a full front end rebuild kit, i mean everything from new ball joints, to bushings and such for the stock upper and lower arms, and so on. I am not sure what year or years the kit is from and no i cannot find where i bought the kit from, but anyways the parts all put together will not work. The center link is hitting the frame.
So, here is where i am. I will buy a new kit, whatever i need, i just do not know what works. As you can tell i am not good at front ends, i am learning. So, any help here is greatly appreciated!!

Thanks

04-10-2020, 12:42 PM	#87
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed Ok all, I am stuck and frustrated. Here is my issue. I have CPP 2.5 drop spindles, CaptainFab's power steering conversion with new power steering box installed, new pitman arm installed and a 1966 C10 non power steering center link. I have a full front end rebuild kit, i mean everything from new ball joints, to bushings and such for the stock upper and lower arms, and so on. I am not sure what year or years the kit is from and no i cannot find where i bought the kit from, but anyways the parts all put together will not work. The center link is hitting the frame. So, here is where i am. I will buy a new kit, whatever i need, i just do not know what works. As you can tell i am not good at front ends, i am learning. So, any help here is greatly appreciated!! Thanks