The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sgaylord · 08-10-2009, 03:24 PM

UPDATE :::::

After taking a little time off from the truck to settle my life down, I have jumped back in the saddle again.

I welded in the cowl shell and seam sealed in a few places. Now the cowl is all welded in. I still need to go back and grind down the welds to pretty them up but she's in there for good...

I also cut the section of the firewall out where the heater core mounts and welded in a solid sheet of 20 gauge sheet metal to smooth it out. I have a few more holes to fill, then I will weld it back in and start on the lower "A" pillars, kick panel patches and floors.

I don't expect my progress to be that fast as I have a few irons in the fire, but at least I have some time to do a few things....
Name: DSCN2323.jpg
Views: 2094
Size: 100.2 KB

Name: DSCN2323.jpg
Views: 2094
Size: 100.2 KB

Name: DSCN2325.jpg
Views: 2100
Size: 99.8 KB

Name: DSCN2322.jpg
Views: 2070
Size: 96.1 KB

08-10-2009, 03:24 PM	#51
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezabel" UPDATE ::::: After taking a little time off from the truck to settle my life down, I have jumped back in the saddle again. I welded in the cowl shell and seam sealed in a few places. Now the cowl is all welded in. I still need to go back and grind down the welds to pretty them up but she's in there for good... I also cut the section of the firewall out where the heater core mounts and welded in a solid sheet of 20 gauge sheet metal to smooth it out. I have a few more holes to fill, then I will weld it back in and start on the lower "A" pillars, kick panel patches and floors. I don't expect my progress to be that fast as I have a few irons in the fire, but at least I have some time to do a few things.... __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!