Quote:
Originally Posted by shrunken66stroker
The bed is welded up and is now a stock length shorty. If anyone is doing this make sure you brace it up tight before cutting the rear. Both sides of the rear come off at the same time and are connected with the cross sill. I used a piece of angle I had and bolted it where the tail gate chains go. I also braced it in the center the same way. When I put the tailgate back on the gaps and alignment were perfect... or as good as they were before.
|
Shrunken66stroker,
Great thread, apologize in advance if my question is answered some where in your build thread....I too have a long bed, just panels and rear end cut off, and want to know what is the exact length in front and back of wheel well? Basically want to have someone weld it up into shorty....ANy info would be greatly appreciated...
Thanks,
el_bole