[Benlugchev]

UPDATE:
Lightened up the radiator support, made room for the turbo. fabricated the passenger side hot pipe from 2" sch.10 -304SS. the plan is to merge the drivers side manifold into the 90 degree elbow just before the turbo. fabricated the T6 turbo flange from a piece of 3/8" stainless plate. Powder coated the intake manifold. elbow.(sour apple green) valley cover and timing cover (black). hope to get the drivers side hot pipe fabbed by end of the week and then yank the engine repaint the chassis. install my clutch and put the engine back in place.